外部I/Fの数 , 内部I/Fの数の構成が問題になるんでしょうか。
本家LSIのダウンロードサイト(https://www.broadcom.com/support/download-search)を調べてみると、SAS 9212-4i4eの選択肢は出てこない。ワード検索で調べるとP18(ver 18 )のFirmwareが出てきた。
[zip] 9212-4i4e_Package_P18_IR_IT_Firmware_BIOS_for_MSDOS_Windows
P20 (Ver 20)がLSI 2008の最新であるみたい(Supper Micro )なのでちょっと残念。
とりあえず、Firmware は、LSIからのP18 , BIOS/UEFI は、SuperMicronからの物を使ってみます。
まずは、 綺麗にFlash
fs5:\P10> sas2flash -o -e 6
LSI Corporation SAS2 Flash Utility
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved
Advanced Mode Set
Adapter Selected is a LSI SAS: SAS2008(B2)
Executing Operation: Erase Flash
Erasing Flash Region...
Eras Flash Operation Successful!
Resetting Adapter...
Reset Sucessful!
Finished Processing Commands Successfully.
Exiting SAS2Flash.
メインのFirmware の更新
fs5:\P18> sas2flash -f 214i4eir.bin
LSI Corporation SAS2 Flash Utility
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved
Adapter Selected is a LSI SAS: SAS2008(B2)
Executing Operation: Flash Firmware Image
Frimware Iamge has a Valid Checksum.
Firmware Version 18.00.01.00
Firmware Iamge compatible with Controller.
Valid NVDATA Image found.
NVDATA Version 11.00.00.00
Checking for a compatible NVData Image...
NVDATA Device ID and Chip Revision match verified.
Valid Initialization Image verified.
Valied BootLoader Image verified.
Chip is in RESET state. Attempting Host Boot...
Firmware Host Boot Successful.
Mfg Page 2 Mismatch Detected.
Writing Current Mfg Page 2 Setting to NVRAM.
Updated Mfg Page 2.
Resetting Adapter...
Adapter Successfully Reset.
Chip is in RESET state. Performing Host Boot...
Firmware Host Boot Successful.
Beginning Firmware Download...
Firmware Download Successful.
Resetting Adapter...
Adapter Successfully Reset.
Finished Processing Commands Successfully.
Exiting SAS2Flash.
次にBIOS & UEFI
fs5:\P18> sas2flash -b mptsas2.rom
LSI Corporation SAS2 Flash Utility
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved
Adapter Selected is a LSI SAS: SAS2008(B2)
Executing Operation: Flash BIOS Image
Validating BIOS Image...
BIOS Header Signature is Valid
BIOS Image has a Valied Checksum.
BIOS PCI Structure Signature Valid.
BIOS Image Compatible with the SAS Controller.
Attempting to Flash BIOS Image...
Verifying Download...
Flash BIOS Image Successful.
Update BIOS Version in BIOS Page 3.
Finished Processing Commands Successfully.
Exiting SAS2Flash.
fs5:\P18> sas2flash -b x64sas2..rom
LSI Corporation SAS2 Flash Utility
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved
Adapter Selected is a LSI SAS: SAS2008(B2)
Executing Operation: Flash BIOS Image
Validating BIOS Image...
BIOS Header Signature is Valid
BIOS Image has a Valied Checksum.
BIOS PCI Structure Signature Valid.
BIOS Image Compatible with the SAS Controller.
Attempting to Flash BIOS Image...
Verifying Download...
Flash BIOS Image Successful.
Update BIOS Version in BIOS Page 3.
Finished Processing Commands Successfully.
Exiting SAS2Flash.
結果として、こんな風になりました。
fs5:\P18> sas2flash -list
LSI Corporation SAS2 Flash Utility
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved
Adapter Selected is a LSI SAS: SAS2008(B2)
Controller Number : 0
Controller : SAS2008(B2)
PCI Address : 00:01:00:00
SAS Address : XXXXXXX-X-XXXX-XXXX
NVDATA Version (Default) : 11.00.00.05
NVDATA Version (Persistent) : 11.00.00.05
Firmware Product ID : 0x2713 (IR)
Firmware Version : 18.00.01.00
NVDATA Vendor : LSI
NVDATA Product ID : SAS9212-4i
BIOS Version : 07.39.00.00
UEFI BSD Version : 07.27.01.00
FCODE Version : N/A
Board Name : LSI2008-IR
Board Assembly : YY-YYYYY-YYY
Board Tracer Number : ZZZZZZZZZ
Finished Processing Commands Successfully.
Exiting SAS2Flash.
安い買い物で、かなり楽しめた感じです。
