そのFirmware をケット sp60767.exe
展開して、出てきたFirmware をEFIブートディバイスの"\HP"ディレクトリに設置。
当然"sas2flash.efi"も同じディレクトリに
まずは、Firmware の消去
fs0:\HP> sas2flash -o -e 6
LSI Corporation SAS2 Flash Utility
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved
SAS2FLASH: Disconnected the EFI Driver.
Advanced Mode Set
Adapter Selected is a LSI SAS: SAS2008(B2)
Executing Operation: Erase Flash
Erasing Flash Region...
Erase Flash Operation Successful!
Resetting Adapter...
Reset Successful!
Finished Processing Commands Successfully.
Exiting SAS@Flash.
SAS2FLASH: Reconnecting the EFI Driver. Please wait...
SAS2FLASH: Failed Reconnecting the EFI Driver. (EFI Error: Not Found)
次にFirmwareのアッフムデート
fs0:\HP> sas2flash -f phase142.fw
LSI Corporation SAS2 Flash Utility
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved
Adapter Selected is a LSI SAS: SAS2008(B2)
Executing Operation: Flash Firmware Image
Frimware Iamge has a Valid Checksum.
Firmware Version 14.00.01.00
Firmware Iamge compatible with Controller.
Valid NVDATA Image found.
NVDATA Version 0E.03.00.00
Checking for compatible NVData Image...
NVDATA Device ID and Chip Revision match verified.
Valid Initialization Image verified.
Velid BootLoader Image verified.
Chip is in RESET state. Attempting Host Boot...
Firmware Host Boot Successful.
Beginning Frimware Download...
Firmware Download Successful.
Resetting Adapter...
Adapter Successfully Reset.
Finished Processing Commands Successfully.
Exiting SAS@Flash.
今度はBIOSのアッフムデート
fs0:\HP> sas2flash -b mptsas2.rom
LSI Corporation SAS2 Flash Utility
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved
Adapter Selected is a LSI SAS: SAS2008(B2)
Executing Operation: Flash BIOS Image
Validating BIOS Image...
BIOS Header Signature is Valid
BIOS Image has a Valid Checksum.
BIOS PIC Structure Signature Valid.
BIOS Image Compatible with the SAS Controller.
Attempting to Flash BIOS Image...
Verifying Download...
Flash BIOS Image Successful.
Updated BIOS Version is BIOS Page 3.
Finished Processing Commands Successfully.
Exiting SAS2Flash.
最後に、EFI Firmware
fs0:\HP> sas2flash -b x64sas.rom
LSI Corporation SAS2 Flash Utility
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved
Adapter Selected is a LSI SAS: SAS2008(B2)
Executing Operation: Flash BIOS Image
Validating BIOS Image...
BIOS Header Signature is Valid
BIOS Image has a Valid Checksum.
BIOS PIC Structure Signature Valid.
BIOS Image Compatible with the SAS Controller.
Attempting to Flash BIOS Image...
Verifying Download...
Flash BIOS Image Successful.
Updated BIOS Version is BIOS Page 3.
Finished Processing Commands Successfully.
Exiting SAS2Flash.
アップデートの結果は、
fs0:\HP> sas2flash -list
LSI Corporation SAS2 Flash Utility
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved
Adapter Selected is a LSI SAS: SAS2008(B2)
Controller Number : 0
Controller : SAS2008(B2)
PCI Address : 00:01:00:00
SAS Address : ZZZZZZZ-Z-ZZZZ-ZZZZ
NVDATA Version (Default) : 0E.03.00.04
NVDATA Version (Persistent) : 0E.03.00.04
Firmware Product ID : 0x2713 (IR)
Firmware Version : 14.00.01.00
NVDATA Vendor : LSI
NVDATA Product ID : SAS9212-4i
BIOS Version : 07.27.01.00
UEFI BSD Version : 07.21.06.00
FCODE Version : N/A
Board Name : LSI2008-IR
Board Assembly : YY-YYYYY-YYY
Board Tracer Number : XXXXXXXXX
Finished Processing Commands Successfully.
Exiting SAS2Flash.
この状況では、しっかりHDDの認識ができました。
しかし、BIOS , EFI 部のバァージョンは、PH20.0.4-IRの方が新しいなぁ。
